Showing all 5 results

Firetide FWC 1000 WLAN Controller
Firetide FWC 1000 WLAN Controller

Bộ điều khiển WLAN 1000 WLAN Controller của Firetide hỗ trợ 50 thiết bị Aps.

Bộ Hotspot Wifi này bao gồm thiết bị điều khiển WLAN Firetide quản lí 50 Aps, có 4 cổng tốc độ 10/100/1000 Mbps, một cáp mạng RJ45, bao gồm nguồn cấp 12VDC, dây nguồn AC Bắc Mỹ 2 mét.

Download Spec Sheet     Where to Buy

Read more
hotclient_2100
Firetide HotClient 2100 Indoor CPE
The HotPoint 2100 Indoor CPE connects to outdoor access points to provide redundancy of coverage.
  • Seamless Indoor and Outddor operations
  • Access on or off mesh
  • Modularity for flexible placement
  • Single-point Network Management for Mesh and Access
  • Advanced Security and Performance
  • 400 mw radio
  • WPA2 and WEP Encryption
  • 16 SSID’s
  • Industry compliant QoS

 

 

 



Download Spec Sheet     Where to Buy

Read more
hotpoint-4100-indoor-access-point
Firetide HotPoint 4100 Indoor Access Point

HotPoint 4100 indoor access point. 802/11b/g interface. Single Radio, 35Mbps UTP Capacity. Manual trainsmit power control. 32 concurrent users per HotPoint. AC adapter included.

  • Firetide mesh nodes and access points can be physically separated allowing system integrators to optimize RF separately for both the mesh backhaul as well as client access.
  • HotPoint access points can connect directly to a conventional wired infrastructure eliminating the need to install a mesh node in locations where wired connectivity is readily available.
  • The 4100/4200 Access Point can be seamlessly integrated with the existing enterprise L2/L3 networks.
  • Whether connected directly to a Firetide wireless mesh network or to a wired infrastructure, the HotPoint access points are fully integrated and managed with the same HotView software used to manage Firetide mesh nodes.
  • Layered service levels can be enabled through Virtual APs (VAPs). Virtual AP Groups are supported with controller.

 

 



Download Spec Sheet     Where to Buy

Read more
hotpoint-5100-indoor-access-point
Firetide HotPoint 5100 Indoor Access Point

HotPoint 5100 MIMO Access Point – Indoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), AC to DC power adapter with region specific power cable, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging, one RJ45 Ethernet cable.

  • Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
  • Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
  • Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
  • HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
  • HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
  • 1 GigE interface capable of 10/100/1000 Base-T

 



Download Spec Sheet     Where to Buy

Read more
hotpoint-5200-outdoor-access-point
Firetide HotPoint 5200 Outdoor Access Point

HotPoint 5200 MIMO Access Point – Outdoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), pole mounting bracket, PoE Injector,1 RJ45 Ethernet cable for staging, 1 weatherized ethernet kit, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging.

  • Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
  • Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
  • Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
  • HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
  • HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
  • 1 GigE interface capable of 10/100/1000 Base-T

 



Download Spec Sheet     Where to Buy

Read more