Showing 61–72 of 108 results
Firetide HotClient 2100 Indoor CPE
- Seamless Indoor and Outddor operations
- Access on or off mesh
- Modularity for flexible placement
- Single-point Network Management for Mesh and Access
- Advanced Security and Performance
- 400 mw radio
- WPA2 and WEP Encryption
- 16 SSID’s
- Industry compliant QoS
Firetide HotPoint 4100 Indoor Access Point
HotPoint 4100 indoor access point. 802/11b/g interface. Single Radio, 35Mbps UTP Capacity. Manual trainsmit power control. 32 concurrent users per HotPoint. AC adapter included.
- Firetide mesh nodes and access points can be physically separated allowing system integrators to optimize RF separately for both the mesh backhaul as well as client access.
- HotPoint access points can connect directly to a conventional wired infrastructure eliminating the need to install a mesh node in locations where wired connectivity is readily available.
- The 4100/4200 Access Point can be seamlessly integrated with the existing enterprise L2/L3 networks.
- Whether connected directly to a Firetide wireless mesh network or to a wired infrastructure, the HotPoint access points are fully integrated and managed with the same HotView software used to manage Firetide mesh nodes.
- Layered service levels can be enabled through Virtual APs (VAPs). Virtual AP Groups are supported with controller.
Firetide HotPoint 5100 Indoor Access Point
HotPoint 5100 MIMO Access Point – Indoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), AC to DC power adapter with region specific power cable, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging, one RJ45 Ethernet cable.
- Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
- Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
- Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
- HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
- HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
- 1 GigE interface capable of 10/100/1000 Base-T
Firetide HotPoint 5200 Outdoor Access Point
HotPoint 5200 MIMO Access Point – Outdoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), pole mounting bracket, PoE Injector,1 RJ45 Ethernet cable for staging, 1 weatherized ethernet kit, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging.
- Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
- Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
- Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
- HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
- HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
- 1 GigE interface capable of 10/100/1000 Base-T
FM08 – 8-inch Vehicle Mount Computer
Field replaceable front panel to reduce service cost and prevent productivity loss High Performance Intel ATOM platform (E3845 2M Cache, 1.91GHz) SupportWindows 10 IoT Enterprise, Windows Embedded 8.1 Industry Pro, Windows 7 Professional for Embedded system, Windows Embedded Standard 7, or Windows Embedded Compact 7 Magnesium Alloy Housing Anti scratch resistive touch (finger touch and stylus) SMA Connector for external antenna Fan-Less & Robust Design Wide range Operating Temperature QWERTY Keypad.
Thông số kỹ thuật Liên hệ mua hàng
FM10 – 10.4-inch Vehicle Mount Computer
Features
- Field replaceable front panel to reduce service cost and prevent
productivity loss - High Performance Intel ATOM platform (E3845 2M Cache, 1.91GHz)
- Support Windows 10 IoT Enterprise, Windows Embedded 8.1 Industry Pro, Windows 7 Professional for Embedded system, or Windows Embedded Standard 7
- Magnesium Alloy Housing
- Anti scratch resistive touch (finger touch and stylus)
- SMA Connector for external antenna
- Fan-Less & Robust Design
- Wide range Operating Temperature
Force 110 PTP
The ePMP Force 110 PTP high gain integrated solution enhances range (25 dBi antenna with 30 dBm of transmit power) and improves throughput (up to 200 Mbps of real user data). Force 110 PTP acheives 2 ms of round-trip latency and provides a 802.3af compliant Gigabit Ethernet port. Comprised of the ePMP 1000 Connectorized Synchronized Radio and the ePMP110A-525 Dish.
Force 180
The ePMP Force 180 5 GHz subscriber module is the next generation of the ePMP 5 GHz Integrated Radio offering a higher-gain, integrated 16 dBi patch antenna.
Installation and alignment are easy with the adjustable mounting bracket, and the Force 180 is small, sleek, and equipped with Gigabit Ethernet port to deliver the maximum throughput.
Force 200 2.4 GHz
Designed to operate in high interference environments
The ePMP Force 200 adds a subscriber module and PTP radio to ePMP’s 2.4 GHz line of products provides superior throughput of over 200 Mbps of real user data. Long range deployment is enabled by the 17 dBi antenna combined with 30 dBm transmit power. Configurable Modes of operation ensure robust adaptivity to both symmetrical and asymmetrical traffic while providing high performance and round-trip latency as low as 2 – 3 ms.
Force 200 5 GHz
Designed to operate in high interference environments
The ePMP Force 200 5 GHz adds a subscriber module and point-to-point (PTP) radio to ePMP’s 5 GHz line of products and provides superior throughput of over 200 Mbps of real user data. Long range deployment is enabled by the 25 dBi antenna. Configurable Modes of operation ensure robust adaptivity to both symmetrical and asymmetrical traffic while providing high performance and round-trip latency as low as 2 – 3 ms.
M101B 10.1″ Rugged Tablet PC
• 10.1” 1920×1200 IPS LED Panel with P-Cap Touch • Long battery life with Intel® BayTrail-M processor • IP65 water and dust proof • Optional Barcode or RFID Reader • Dual Camera Design: 5MP Main camera with LED flash / 2MP Webcam • Optional Expansion port for USB / RS232 connection • Hot-Swappable Battery Design /Optional high capacity battery pack • 2 Programmable function keys • Computrace® theft protection support • With Optical Bonding for Sunlight Readability.