Showing 16–30 of 85 results

Firetide FWC 1000 WLAN Controller
Firetide FWC 1000 WLAN Controller

Bộ điều khiển WLAN 1000 WLAN Controller của Firetide hỗ trợ 50 thiết bị Aps.

Bộ Hotspot Wifi này bao gồm thiết bị điều khiển WLAN Firetide quản lí 50 Aps, có 4 cổng tốc độ 10/100/1000 Mbps, một cáp mạng RJ45, bao gồm nguồn cấp 12VDC, dây nguồn AC Bắc Mỹ 2 mét.

Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
hotclient_2100
Firetide HotClient 2100 Indoor CPE
The HotPoint 2100 Indoor CPE connects to outdoor access points to provide redundancy of coverage.
  • Seamless Indoor and Outddor operations
  • Access on or off mesh
  • Modularity for flexible placement
  • Single-point Network Management for Mesh and Access
  • Advanced Security and Performance
  • 400 mw radio
  • WPA2 and WEP Encryption
  • 16 SSID’s
  • Industry compliant QoS

 
 
Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
hotpoint-4100-indoor-access-point
Firetide HotPoint 4100 Indoor Access Point

HotPoint 4100 indoor access point. 802/11b/g interface. Single Radio, 35Mbps UTP Capacity. Manual trainsmit power control. 32 concurrent users per HotPoint. AC adapter included.

  • Firetide mesh nodes and access points can be physically separated allowing system integrators to optimize RF separately for both the mesh backhaul as well as client access.
  • HotPoint access points can connect directly to a conventional wired infrastructure eliminating the need to install a mesh node in locations where wired connectivity is readily available.
  • The 4100/4200 Access Point can be seamlessly integrated with the existing enterprise L2/L3 networks.
  • Whether connected directly to a Firetide wireless mesh network or to a wired infrastructure, the HotPoint access points are fully integrated and managed with the same HotView software used to manage Firetide mesh nodes.
  • Layered service levels can be enabled through Virtual APs (VAPs). Virtual AP Groups are supported with controller.

 

 



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
hotpoint-5100-indoor-access-point
Firetide HotPoint 5100 Indoor Access Point

HotPoint 5100 MIMO Access Point – Indoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), AC to DC power adapter with region specific power cable, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging, one RJ45 Ethernet cable.

  • Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
  • Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
  • Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
  • HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
  • HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
  • 1 GigE interface capable of 10/100/1000 Base-T

 



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
hotpoint-5200-outdoor-access-point
Firetide HotPoint 5200 Outdoor Access Point

HotPoint 5200 MIMO Access Point – Outdoor. Includes Firetide MIMO access point (dual radio 802.11 a/b/g/n, 100 mW), pole mounting bracket, PoE Injector,1 RJ45 Ethernet cable for staging, 1 weatherized ethernet kit, six dual band 2.4 GHz and 5 GHz 3 dBi antennas for staging.

  • Radios can operate in channel widths of 5,10, 20 and 40 MHz (MIMO only), with 5 and 10 MHz channel widths only available on the 4.9 GHz band.
  • Each indoor access point has a UL2043 plenum-rated enclosure and an RJ-45 connector for attaching to a Firetide wireless mesh node or a conventional Ethernet port.
  • Outdoor HotPoint 5200 access points have rugged NEMA 4X/IP67-rated cast aluminum enclosures and have one weatherproof Ethernet connector.
  • HotPoint wireless access points can be mounted to a Firetide mesh node to provide Wi-Fi access to any indoor or outdoor location without the need for backhaul cabling.
  • HotPoint access points operate in the 2.4 GHz band and feature WPA2 and WEP encryption, up to 16 SSIDs and industry compliant QoS.
  • 1 GigE interface capable of 10/100/1000 Base-T

 



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
Wavion Coverage Tool
Wavion Coverage Tool

The Wavion Coverage Tool (WCT) allows you to measure the actual coverage and throughput in actual deployment settings. To operate the WCT all you need is to install it on a laptop, run the IPERF application on the server, and then take a drive in the area around the installed base station. Along the route, the WCT will collect the following parameters:

  • Coverage at each point
  • Throughput at each point

These results can be graphically displayed over Google Earth maps while you are driving and after completion (you will need of course to install Google Earth on your laptop). The WCT is the ideal tool not only for the planning phase of your project but also as part of your on going periodical check-ups of your system. This will ensure your installation is functioning optimally and that you achieved the targeted coverage

 



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
Wavion Service-Pro
Wavion Service-Pro

Service-Pro offers a comprehensive OSS/BSS service management solution for broadband wireless providers based on three components: the RADIUS server, the payment module- a credit card management billing module and the access controller.

The Service-Pro suite offers a wide range of capabilities including: subscriber management, bandwidth management, billing, service plans and captive portals.

Wavion Service-Pro provides a comprehensive report engine for statistical and usage analysis in real-time and through system logs.

The solution can be integrated with various access controllers creating a tailored and scalable network architecture.

 


Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
Wavion WavioNet – Network Management System
Wavion WavioNet – Network Management System
WavioNet is an advanced SNMP based Network Management System (NMS) application.

It allows service providers to manage and monitor networks with the Wavion broadband wireless solution – Base Stations, CPE’s and point-to-point radios.

WavioNet offers a rich toolbox of network management and monitoring features.

It offers flexible viewing options with advanced and customizable fault management, performance monitoring as well as configuration and user management.



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
wbsn-2450-i
Alvarion WBSn-2450-I Indoor Access Point
WBSn-2450-I is the indoor access point based on two simultaneous radios, operating in 2.4 and 5 GHz band simultaneously. Operators can use the 2.4 GHz band for indoor customer access and the 5 GHz radio for either indoor access or backhauling.
  • Gigabit Wi-Fi Capacity and extended coverage : With spatially adaptive Beamforming leveraging a powerful High Gain Diversely Polarized (HGDP) antenna array
  • Carrier-grade Wi-Fi: Designed for high reliability and manageability
  • Rich Embedded Networking: Including Routing, integrated Access Controller, 802.1x security, RADIUS interface
  • Environmentally Friendly: Low power consumption, fewer sites to power, aesthetic smart design, and green standard compliance
  • Interference Immunity Suite
  • Beamforming ability to suppress interference
  • Dynamic Interference Handling (DIH) algorithm that continuously optimizes receiver’s parameters according to
  • noise level
  • Automatic Channel Selection (ACS) algorithm for best operating channel online selection
  • Warion Rate Adaptation (WARA) for optimal rate selection in environments with high interference and high capacity

 


Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
omni base stantion
Alvarion WBSn-2450-O Omni Base Station (Dual Band)
WBSn-2450-O is based on an array of three dual-band (2.4 and 5 GHz) antennas and six radios that cover 360⁰. This is useful when both bands are used for Wi-Fi access and 360⁰ coverage is required.
  • WBSn dual band base station, spatially adaptive Beamforming and 802.11n 3×3:3 MIMO operating at 2.4 and 5 GHz bands concurrently, omni-directional tilted antennas, PoE input, FCC / TUV compliant.
  • Total directed power (EIRP): 43 dBm (2.4Ghz), 43 dBm (5Ghz).
  • IP68 outdoor enclosure.
  • Maximum capacity: 900 Mbps.
  • Maximum users: 500 (subject to available BW).
  • Triple the range in comparison to conventional access points.
  • Beam-forming technology provides high quality NLOS coverage.
  • The superior link gain enables better penetrations into buildings.
  • Superior interference mitigation.



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
wbsn_2400_2450_s
Alvarion WBSn-2400-S Sector Base Station

WBSn-2400-S is based on array of three radios and three antennas that cover a 1200 sector.

  • WBSn, spatially adaptive Beamforming and 802.11n 3×3:3 MIMO operating at 2.4 GHz, three element sector antenna, PoE input, FCC / TUV compliant.
  • Total directed power (EIRP): 48 dBm.
  • IP68 outdoor enclosure.
  • Maximum capacity: 450 Mbps.
  • Maximum users: 250 (subject to available BW).
  • Triple the range in comparison to conventional access points.
  • Beam-forming technology provides high quality NLOS coverage.
  • The superior link gain enables better penetrations into buildings.
  • Superior interference mitigation.



Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
cnMatrix EX2028
cnMatrix EX2028
Cambium Networks’ next generation switching platform offers
a cloud managed, high performance, feature rich enterprise
grade ethernet switching solution. The cnMatrix™ platform
of switches provides:
• Easy and simple free cloud management with cnMaestro
• Zero touch deployment of switches makes deployment easy
• Zero touch policy based configuration enables automation,
reduces errors and network downtime
• Device profiling, automatic port configuration and network
segmentation improves security posture of the network
• Wireless Aware: Together with Cambium Networks cnPilot
Wi-Fi solution, enables a simple, easy-to-use cloud managed
Unified Wired-Wireless access solution
• Affordable, high quality and enterprise grade Layer 2,
Layer 3 feature set
The cnMatrix series of fully managed switches delivers full
Layer2 and Layer 3 capabilities with enhanced access security.
cnMatrix switches deliver power savings with several models
offering fanless operation. The cnMatrix switch series offers
flexibility with 4 – 10 Gbps (SFP+) uplinks on the 28 port models
while offering 2 – 1Gbps (SFP) uplink ports on the 10 port models.

Thông số kỹ thuật     Liện hệ mua hàng

Chi tiết
cnMatrix EX2028-P
cnMatrix EX2028-P
ICambium Networks’ next generation switching platform offers
a cloud managed, high performance, feature rich enterprise
grade ethernet switching solution. The cnMatrix™ platform
of switches provides:
• Easy and simple free cloud management with cnMaestro
• Zero touch deployment of switches makes deployment easy
• Zero touch policy based configuration enables automation,
reduces errors and network downtime
• Device profiling, automatic port configuration and network
segmentation improves security posture of the network
• Wireless Aware: Together with Cambium Networks cnPilot
Wi-Fi solution, enables a simple, easy-to-use cloud managed
Unified Wired-Wireless access solution
• Affordable, high quality and enterprise grade Layer 2,
Layer 3 feature set
The cnMatrix series of fully managed switches delivers full
Layer2 and Layer 3 capabilities with enhanced access security.
cnMatrix switches deliver power savings with several models
offering fanless operation. The cnMatrix switch series offers
flexibility with 4 – 10 Gbps (SFP+) uplinks on the 28 port models
while offering 2 – 1Gbps (SFP) uplink ports on the 10 port models.

Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
cnMatrix EX2010-P
cnMatrix EX2010-P
Cambium Networks’ next generation switching platform offers
a cloud managed, high performance, feature rich enterprise
grade ethernet switching solution. The cnMatrix™ platform
of switches provides:
• Easy and simple free cloud management with cnMaestro
• Zero touch deployment of switches makes deployment easy
• Zero touch policy based configuration enables automation,
reduces errors and network downtime
• Device profiling, automatic port configuration and network
segmentation improves security posture of the network
• Wireless Aware: Together with Cambium Networks cnPilot
Wi-Fi solution, enables a simple, easy-to-use cloud managed
Unified Wired-Wireless access solution
• Affordable, high quality and enterprise grade Layer 2,
Layer 3 feature set
The cnMatrix series of fully managed switches delivers full
Layer2 and Layer 3 capabilities with enhanced access security.
cnMatrix switches deliver power savings with several models
offering fanless operation. The cnMatrix switch series offers
flexibility with 4 – 10 Gbps (SFP+) uplinks on the 28 port models
while offering 2 – 1Gbps (SFP) uplink ports on the 10 port models.

Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết
cnMatrix EX2010
cnMatrix EX2010
Improve network performance while reducing the time and cost of provisioning and management

cnMatrix switches simplify network deployment and operation. When deployed with cnPilot WLAN access points and the cnMaestro management system, network operators have an affordable, feature rich, high quality unified wired/ wireless enterprise grade network. Improve performance, security and end user satisfaction while reducing costs.

Quality of Service • ACL mapping and marking of ToS/DSCP (COS) • ACL mapping marking of 802.1p
• ACL mapping to priority queue • DiffServ support
• Honoring DSCP and 802.1p(CoS) • Traffic shaping/metering
• Priority queue management using Weighted Round Robin (WRR), Strict Priority (SP) and a combination of WRR and SP
Traffic Management • ACL-based inbound rate limiting policies • Broadcast, multicast and unknown unicast rate limiting
• Inbound rate limiting per port • Outbound rate limiting per port/queue
Security • 802.1x authentication • MAC authentication
• DHCP snooping • RADIUS authentication/authorization
• Neighbor Discovery (ND) inspection • Authentication, Authorization, and Accounting (AAA)
• Radius/Tacacs/Tacacs+ • Secure copy (SCP)
• Secure shell • Local username/password
Layer 2 feature set • 802.1s multiple spanning tree • VLAN, Port, Protocol, 802.1q
• 802.1d • 802.1x authentication
• Auto MDI/MDIX • Bpdu guard, Root Gard
• IGMP Snooping V1v2 • LLDP/LLDP Med
• IGMP Proxy • Static MAC
• Flow Control per port/per queue • IGMP v2v3 fast leave
• Per VLAN STP (PVST/PVRST) • Port Mirroring: port based, ACL based, VLAN based
• Private VLAN edge/port isolation • Link Aggregation Groups (Static/LACP)
• Rate limiting/Storm Control • Jumbo frame support
• DHCP snooping • BPDU filtering
• Broadcast/Multicast/Unlearned Unicast (Storm Control) • DoS Protection (Port, CPU)
• Ping/TraceRoute/ICMPv6
Management • cnMaestro (cloud management) • Industry standard Command Line Interface (CLI)
• DHCP autoconfiguration • Embedded web management (HTTP/HTTPS)
• Embedded DHCP server • USB file management and storage
• Out of band Ethernet management client/server • SSH /SSH v2
• SNMP v1v2 • DHCP relay
• System Network Time Protocol (SNTP) • Local/remote system logging
• Auto Edge / Auto Attach • Display log messages multiple terminals
• TFTP • Telnet client/server

Thông số kỹ thuật     Liên hệ mua hàng

Chi tiết